Ways to sew on badges by hand or by machine


If you would like to brighten up a piece of clothing, accessory, luggage piece or perhaps hats you can actually sew on badges to have the fresh look easily. Badges or patches when placed strategically can immediately replace the look of a garment or accessory and take it from boring to spunky in just a few minutes. If you have children and they keep earning badges of merit you would like to sew them on. However, as intimidating as it might sound, sewing on badges isn’t very difficult when you know how to do it.

To do this procedure of sewing on a badge, begin with placing the badge over the place in which you want it to be. Now secure the badge well with some pins in order that it stays in place and doesn’t shift while you’re sewing it on. Now if you’re putting the patch over a garment, you need to fix the patch after which try the garment on to be certain that the patch or the badge looks most suitable in the place. If the patch needs a little readjustment you can accomplish it at this time easily.

Now thread the needle being sure that the thread you’re using isn’t too long. Keep the thread in a length of approximately 18inches for quick maneuvering. In case your thread is too long then you might get bothered by knots. After you have the thread ready make a knot at the end of the thread. You can actually thread a needle by hand by holding the non knotted end between your forefinger and thumb after which passing it through the eye of the needle. You can also take the help of a needle threader if you find threading a needle in this manner difficult.


Pass the needle in the badge and the fabric being sure that the knot is on the wrong side of the patch. Leave a space of 1/8th of an inch from where you started stitching keeping this distance from your last stitch all the time. Continue stitching surrounding the entire perimeter of the badge till you have finished stitching it all the way through. Now knot the thread on the underside of the patch by looping your thread by way of a single stitch. Pull the thread tightly to secure the knot after which cut off any excess thread that’s left. Lastly remove the extra safety pins that you were using to secure the patch in place.

You can also sew on badges with the assistance of a sewing machine if you don’t wish to accomplish the same yourself. Decide on a thread that matched the color of your patch and then tread your machine. It’s also possible to decide on a contrasting color with regards to the look that you want to present your badge. Once this is done you should start sewing you badge. Use the top of the badge for your starting place and sew all across the edge of your badge making use of the regular stitch mode ending at your kick off point. Once done, cut the excess thread that connects the badge to the machine and your garment is ready to be utilized together with the badge.